BREAK ARTS III · published · build 26129780
Fixed a bug where the following stats would change depending on frame rate:
Shield's natural recovery rate (shields on units with low shield values sometimes would not recover, or would recover faster than intended)
Kick's tracking duration (now standardized to the equivalent of 90 FPS)
Accelerator output ramp-up (now standardized to the equivalent of 90 FPS)
Fixed a bug where the maximum shield value on units equipped with BIOTIN would fluctuate.
As the amount that was being added when loading units, etc. has been removed, shields may be lower than before.
BIOTIN only strengthens structure and does not increase shields.
Fixed a bug where lightweight units and diffractor bits would accelerate abnormally near the center of Klein (gravity field).
Fixed a bug where the smoke from the additional effect "Smoke" would sometimes not display.
Fixed a bug in the Designer where the on-screen UI could disappear and become impossible to restore.
The UI will now also be restored when display switching is performed rapidly in succession, or when an error occurs during saving.
Such as when finishing Action Check while the UI was hidden with the Tab key during Action Check.
Fixed a bug in the Designer's Photo Mode where pressing the gamepad's Start button would not open the settings.
Fixed a bug in the main menu where rapidly pressing consecutive items would cause screens to open overlapping each other.
Such as when pressing MACHINE DESIGNER and ACQUIRE MACHINES in succession.
Fixed a bug in the Designer where, when detaching a module, quickly moving the cursor to another module would cause modules to overlap or disappear.
In addition, a cover is now displayed on the connector where a module was detached.
Fixed bugs in Designer Mode where the display of unit parameters was incorrect.
EN capacity was not displayed in the fixed-value color, and cooldown ability was displayed twice.
Fixed-value items were displaying increases/decreases from parts.
Thruster weight was not included in the display (e.g. SUNFISH displayed as 0 kg).
Fixed a bug where one of the loading screen Tips (Grounded (Walking) Type Legs) would not display.
Fixed a bug in Co-op where progress could stall if the host and participants had different difficulty (Hard Mode) settings.
Participants' difficulty will now match the host's setting.
Fixed a bug in Co-op where a player in charge of a subsystem switching or fixing lock-on would cancel the host's lock-on fixation.
Fixed the following bugs with Co-op subsystem assignment:
Assignments being reset when players join or leave.
Players with "AI" in their name being unable to be assigned.
Assignments becoming misaligned when a player leaves midway
Fixed a bug where, on session screens such as Co-op or the "Waiting for host to make selection..." screen, leaving the game idle for a while would cause the background camera to switch or make the gamepad stop responding.
Fixed a bug in the SETUP screen where, even when a Co-op module's authorization setting was set to Subsystem, reopening the screen would display "Main System."
This was a display-only bug; the setting itself was being applied.
Fixed a bug where some descriptions contained outdated content or content that differed from the actual specifications.
OVERCOAT: Corrected shield strength to "3 times the maximum value."
RADAR JAMMER: Added a description of the effect that jams homing shots targeting the unit and makes them fly straight.
LIGHT STREAK: Added the conditions for use and the range that can be traveled in Racing.
AKD.P.MUNSELL: Added a note that it does not affect thruster thrust or the speed of hover-type legs.
Additional effect "Gravity": Added a description of the effect when directly hitting a unit.
Help/Tips: Corrected the explanations of the shield ratio (12% of structure), data load, drive speed, recovery, and critical heat.
Visit the PLAYISM Website
PLAYISM Publisher Page
Follow us on Twitter
Follow us on Bluesky
Follow us on Facebook
Join our Discord