Build 26311946

This patch focuses on the two most requested improvements: planning where the boat goes, and hearing what is out there.

PLOT A COURSE

• Click ADD WPT and place multiple waypoints — the boat follows them in order.

• Every leg remembers the speed and depth you had ordered when you added it.

• Use SET to apply your current speed/depth to a leg, MOVE to reposition it, or × to remove it.

• Routes that cross land are rejected. The boat comes to all-stop at the final waypoint.

SONAR STATION

• New SONAR STATION console: bearing history, narrowband tonals, contact list and TMA.

• Contacts are quieter bow/stern-on and louder broadside.

• Classification now needs a usable tonal signature, not just time on track.

• TMA builds a course/speed/range solution — manoeuvre to change the bearing rate and tighten it.

• Shallow water and rough seas cause active-sonar reverberation and shorter ping range.

READABLE ON ANY SCREEN

• MENU → DISPLAY → UI: AUTO, 100%, 125%, 150% or 200%.

• Title-screen UI scale control and Ctrl + / Ctrl - / Ctrl 0.

• Text, panels and chart/boat/gauge labels all scale together.

• Remember that you can also toggle on tabbed panes to de-clutter the bottom half of the screen

FIXES AND POLISH

• Career "boats lost" now correctly counts combat losses.

• Fixed a Linux/Steam startup crash caused by the Steam overlay.

• Fuses can be reset with a flat battery if the reactor/generator is online, plus a new RESET ALL FUSES button. Breakers can be reset even on a dead bus.

• Resupply fixed: RSS RELIANT now stops at the RESUPPLY POINT marker instead of up to 5 nm short, so the 2 nm transfer envelope works.

• Simulation now runs at 20 Hz with 10 Hz snapshots — smoother physics and command response.

• All-hands-lost now shows the death screen.

Thanks for the reports — keep them coming. Good hunting.