CoasterWorks · public · first seen
This update adds the Hyper coaster, people walking around your parks, two new flat rides and riders on every ride. I've also reworked the supports for most coaster styles, made the Simple editor quicker to use, and fixed a lot of the freezes you've reported while building. CoasterWorks is also now available on Mac.
Here's what's changed since 0.3.2.1:
A new tall, fast steel coaster in the base game.
The chain lift runs as one continuous loop, round the sprockets at the top and bottom of the lift.
Optional catwalks with stairs, handrails and safety nets, set per section, with their own floor and rail colours. In Walk mode you can climb the lift stairs and sloped catwalks.
Trackside hardware including brakes, drive tyres and anti-rollbacks.
Your parks now have people in them. Guests arrive gradually after a park opens and walk around in groups.
They prefer paths and avoid water, scenery, supports and trees. Away from the paths they keep their distance from rides, and they stop to watch rides in action.
Guests talk, point and cheer, with cheers, laughs, footsteps and a crowd ambience.
New People tab: turn guests on or off and set how many there are for each park, keep them to the paths, and draw no-go areas with a pen. A selected area can be extended or deleted.
Guests also appear in your renders.
If the game runs slowly in a busy park, try fewer guests.
Two new flat rides. Spin Top and Swings
Walk up to either ride and press E to take a seat and press E or Esc to step off. Each ride's panel also has a Ride button and a numbered seat picker.
You can now ride the drop tower the same way, in first person with your own character in the seat.
Riders board and react to the ride, and drop tower riders are different people each time.
Riders fill the seats on every coaster.
Restraints are open in the station, close for the ride and fit each rider. Riders hold on, some put their hands up, and their faces react to the ride.
Riders scream on drops, crests, launches, airtime and inversions, and cheer and laugh.
Riders show in renders at any distance.
Settings > Audio now has an Output device option.
Customise your character from the Home screen, including clothing colours with a colour wheel.
Simple editor pieces have four icon handles beside the track: drag them to change length, pitch and yaw, or turn the roll.
The Simple Track tab has Track, Launch, Lift hill, Brake and Station buttons, plus special track. A button changes the piece you're editing, and Add keeps building the kind you picked.
The first piece after a station follows the coaster style: a launch, a lift hill, or a roll ramp for Flying coasters. Flying coasters also get a Roll ramp button.
Remove deletes whole sections on Simple coasters. Picking a point brings the camera close, and the camera follows new pieces.
In Direct, the Previous and Next piece arrows move the camera to each piece.
In the Advanced Track tab, the pitch/yaw/roll piece is now called "Geometric".
Confirm position and Cancel follow the placement tool when positioning a new coaster.
Spin points have a new Set rotation mode: turn by a set number of degrees over a set time.
A spin point can apply to all cars or to one car (Car 1 is the front car).
New Sync cars option: the whole train follows the front car's spin, starting and finishing together.
The fixed camera has moved forward, clear of the restraints.
Switch tracks have a Width between tracks setting, and the straight and curved tracks now line up squarely without overlapping while the carriage slides.
Supports and trackside hardware stay clear of switch tracks, turntables, transfer tables, drop track and tilt track.
Improved automatic supports for Launch, Inverted, Spinning, Compact Launch and Hybrid coasters, based on how real rides are built. Hybrid wooden supports have realistic timber sizes, bracing at every level and concrete footings.
Supports have realistic bolts, nuts, washers and flange plates.
New Box beam type.
Deleting one end of a beam removes the beam and keeps the other end.
Tube quality now starts at 16 sides and goes up to 96.
Dragging a support part now follows the mouse exactly.
Choose a track finish for each coaster: Normal (clean paint), Worn or Weathered. Wear shows on the rails, spine, ties and supports, from light grime and chips through to rust on Weathered.
Hybrid coasters can have a different colour on each rail. Older Hybrid parks use their previous track colour on both rails.
Track colour, finish and catwalk colour changes show instantly as you drag, without rebuilding the coaster, and undo in one step.
Painted track reflects its surroundings.
125 new theming pieces: walls, glass roofs, lamp posts that light up, canopies, fences, queue fences, benches, bins, planters, tables, stalls and carts, information boards, toilets and turnstiles.
Trees across the world now follow your terrain edits. There's a limit of 40,000 trees, with an option to continue past it, and Reset trees brings back any you've erased.
The tutorial's lesson card has moved to the top left, so it no longer covers the buttons you need.
Camera easing makes the free camera smoother. Set it under Settings > Controls (Low, Medium or High; on by default).
In the Render dialog, "Current view" is now called "Off-ride", with an optional Gentle sway.
Fixed rendered videos with a soundtrack that came out short or drifted out of sync.
Fixed video exports with sound failing on PCs that use the backup encoder.
Lift chains now run at train speed at low frame rates and in renders.
Low quality is much lighter on slower PCs.
Less video memory used, especially on 8 GB graphics cards, and trains use far less memory.
Freezes while building, autosaving, starting Walk mode and opening dropdown menus.
Lift chains disappearing after edits, or staying behind after a lift was deleted.
Moving a coaster leaving its old track and train behind.
Trains bobbing after the lift hill.
Scare actors stopping dead mid-walk.
The rotation tool drifting, and fences shimmering.
Walking stopping when the mouse was over a panel or near some scenery.
CoasterWorks now runs on Apple silicon Macs (M1 or later) with macOS 14 Sonoma or later, through Steam with the same purchase.
DLC, Steam Workshop and park files work on Mac, and parks move freely between Windows and Mac.
Video and 360 video export use macOS's built-in encoders.
Your activity status shows on Steam. Discord activity is Windows-only for now.
Large parks can run slower on Mac than I'd like, and I'm working on it.
Thanks to everyone who's been sending parks, screenshots and bug reports. If you run into an issue, please include what you were doing and, where possible, the park file so I can reproduce it.