Game Frame · public · first seen
Game Frame went into Early Access on 25 September. Since then you wrote 8 reviews and 5 forum threads. I read all of it, and this update is built from it. As with Game Compressor, I traced every report back to its cause before fixing it, and where I can't fix something yet, I say so below instead of leaving it vague.
This is a big update. The short version: Game Frame now has a Full Screen Mode for controllers and handhelds, one in-game menu for everything, a rewritten FPS limiter, three new scaling methods, a proper fix for games above 1080p, and a long list of fixes for the things you reported. The details follow, roughly in the order you reported them.
Several of you had games that showed up in the library but never started a session, and you worked around it by adding the game manually. The cause: when a game ran more than one process, Game Frame locked onto the first one it saw, even if that process had no window. Now it picks the process that actually owns the game window. The Ctrl+Alt+G shortcut also accepts a sibling executable from the same install folder. If a game is running but shows no window for 10 seconds, the home page tells you so and suggests pressing Ctrl+Alt+G in the game window.
Teramai reported that Game Frame crashed immediately, from Steam and from the folder, with no message. I found a real one: if the settings file was locked by OneDrive or an antivirus at the exact moment Game Frame read it, the app crashed before the window existed. It now retries, falls back to defaults if it must, and never overwrites your real settings with those defaults. On top of that there is now a crash window and a crash_*.txt file, a --safe-mode start (software rendering, for broken display drivers), a --diagnostics start that builds a diagnostics package without opening the window, and a "Log folder" button in Settings. If it ever crashes again, I'll be able to tell you why.
Leiyan reported that the overlay randomly showed a different game FPS even with the game locked at 60. The overlay read a different counter than the app and the Target FPS controller did. All three now use the same one-second source-frame counter.
Icky Thump (5120x1440) saw a softer image after tabbing back in, whatever the scaler. The most likely cause was structural: frame generation ran on a 1920x1080 copy of the game and the result was scaled back up. Games above 1080p now get their generated frames at the game's own resolution; only the motion estimation stays at 1080p or below. Measured sharpness on a 2880x1800 game went from 10.1 to 38.4, the same as the game itself. A second bug in the same path made every other frame alternate between "one big, one small" on high-resolution displays; that is fixed too.
A new view of the whole app made for a controller, a couch or a handheld: Home with your recently played games and big cover art, Library with platform filters and search, a full game settings page, and Settings. Everything works with an Xbox controller, the keyboard, the mouse and touch. Play launches the game (Steam and Epic through their own launchers, others through the executable) and the session starts by itself when the game window appears. You can start Game Frame in this mode every time, and switch back to the desktop view at any moment.If you are on a ROG Ally, Legion Go, Steam Deck (Windows), MSI Claw, AYANEO, GPD or OneXPlayer, Game Frame recognises the device and the welcome tour offers to start in Full Screen Mode by default.
The old in-game panel is gone. The shortcut (Insert by default) now opens the same menu in both modes: live game FPS and screen FPS, a frame-time graph, the full latency breakdown (game, frame generation, Pulse), and every setting of the profile — frame generation mode and multiplier, Target FPS, Flow Scale, FPS limit, Pulse, sharpness, VSync, cursor options and the whole overlay configuration with a live preview. Numbers are set with -5 / -1 / +1 / +5 or the D-pad; nothing needs a text box. The menu takes focus so the controller works, and gives focus back to the game when it closes.The overlay itself was redrawn in the app's own fonts and style, with a dark card, a green accent and aligned label/value columns. The texts and the 31 languages did not change.
Some of you use Game Frame mostly as a limiter plus Pulse, without frame generation, and that path deserved better than it had. The game module has a new wait core: the schedule is kept in CPU ticks with fractional carry, so targets like 59.94 or 141.5 no longer drift; a late frame re-anchors the schedule instead of being "caught up" with short frames; a pause of half a second resets it; and the sleep margin adapts to how late the timer actually wakes up. On the bench the old core stalled for 16-22 ms in 3 of 18 runs, the new one never did; with Pulse the frame-time deviation halved; at 144 FPS the CPU time of the limiter halved. The limit now accepts fractional values from 1 to 1000. New shortcuts: Ctrl+Alt+L toggles the limit, Ctrl+Alt+Page Up / Page Down move it by 1 FPS, and all of them can be changed in Settings. The app reads the module's numbers through shared memory instead of a log file, and both the in-game menu and the desktop window show a live frame-time graph with the target line.
Game Frame Sharp is a new scaler of our own: one pass, four samples, edge-aware sharpening that backs off on strong edges so there is no ringing. It costs less than Bicubic.
Nearest and Integer for pixel-art games: no filtering, and Integer uses the largest whole multiple and centres the image.
"Off" now still fills the screen with a plain fit, and you choose between keeping the aspect ratio and stretching. It used to leave the game at 1:1 in the middle of the screen.
Capture queue (0 / 1 / 2 frames) in GPU and Display: 0 gives the lowest latency and drops frames under load, 2 is the old behaviour.
Windows HDR being on no longer stops the session. Game Frame runs in an SDR compatibility mode (SDR games look right; a game that actually renders HDR will have its brightest areas clipped, which is also what Lossless Scaling does by default). There is also an experimental HDR capture option that converts the HDR capture to SDR with a soft curve. I don't own an HDR display, so that option is unverified and off by default; if you try it, tell me what you see.
Remove from library / restore, and remove a folder you added yourself. Removing a game first removes the game module from its folder and never touches the game's files.
Instant start: the last scan is cached, so the list appears immediately and the new scan finishes in the background.
Folder rules from Game Compressor: a drive root is a library, a folder whose subfolders are parts of one install is one game, and when it could be either, Add Folder asks you.
Settings now lists the detected libraries (path, game count, platform) with Open folder / Remove library, plus an Excluded card to bring things back.
Play starts the game from the desktop too: GOG, Riot, Ubisoft and other stores through their executable; the session starts when the window is ready.
Games tab redesigned to the Game Compressor layout: four stat cards, platform / profile / search / sort filters, a table with the General Profile pinned at the top and Start / Edit / Remove per row, and a detail panel with cover art.
How to Use rewritten with three steps, shortcut cards and expandable topics.
System tray: a proper right-click menu, the icon only while the window is hidden, "send Game Frame to the background when a session starts", and start with Windows.
Smoother: page transitions run at 120 fps, and the Full Screen Mode lost its hitches (frames over 50 ms went from 21-25 to 3 per test).
Game icons were being upscaled from 32 px — the real reason parts of the app looked blurry. They are now taken at 256 px, and the tray icon follows your DPI.
Back button when editing the General profile; GPU priority (Normal / High / Realtime) is in the UI; cover art for non-Steam games can be dropped into the profile folder's art subfolder.
"No frames are coming from the game" after 5 seconds of a focused game with 0 FPS — the usual cause is exclusive fullscreen; switch the game to borderless.
Laptops with two GPUs and the NVIDIA background FPS limit (benq994 found that one: a 20 FPS cap for background apps in the NVIDIA app turns a 90 FPS game into 20 at 2x) now have their own hints in the app and the guide.
The yellow capture border on Windows 10 (mathewk198): it is drawn by Windows for any app that captures a window, and Windows 10 gives no way to turn it off. Game Frame explains this in the log and the guide; on Windows 11 it is already disabled.
Anti-cheat messages now name the anti-cheat (EAC, BattlEye, Vanguard, GameGuard...) and say plainly that the FPS limit and Pulse stay off while frame generation keeps working. The policy itself did not change.
Exit codes: a GPU timeout is now reported as its own error instead of "resources could not be created", and the event shows the last engine error line.
Linux / Steam Deck (SteamOS). Saito and others asked. Game Frame captures through a Windows API and its game module is a Windows DLL; there is no Linux version planned for now, and I'd rather say that than leave it open.
A second GPU for frame generation. You can already choose the GPU for frame generation in GPU and Display. Whether a second card actually helps depends on how the two are connected; I have not measured it, so I won't promise a gain.
Video and browsers. Game Frame is built for games. It can work on a video in a browser (one of you uses it for anime at 60 fps after turning off the browser's hardware acceleration), but detecting a 60 fps video behind a 300 Hz window is not something I've solved yet.
Crosshair wobble in fast games (one review mentioned Deadlock). Not solved in this update. A thin crosshair over fast motion is the hardest case for HUD protection, and it stays on my list.
The same situation as Game Compressor: Game Frame is not code-signed yet, and on some Windows 11 PCs Smart App Control blocks unsigned programs it doesn't recognise. Your PC is fine. Signing is in progress, but I won't give a date, and I won't ask you to turn Smart App Control off for one app.
Icky Thump, Magic tofu cat, bLaM!®, Sachiko_Ayumi, H.U.N.K, HammerZ, benq994, Leiyan, mathewk198, Kerstich, Irmaozao do Vorcaro, Saito, AryaTilde, Teramai — your threads and tests are what this update is made of. And thank you to everyone who wrote a review; the detailed ones, including the critical Russian one, were the most useful.If something still isn't right for you, tell me in the forum.
| Depot | New manifest | Previous manifest |
|---|---|---|
| 4913011 | 2169583855188770520 | 621445459962271147 |