Possessions and situations. Lay a situation on a run: track possessions, workers on the line, trains cancelled, terminating early, starting later or replaced by buses, faults. Before the shift you receive and sign a written order in your country's form; during the run it is in the new Orders tab. Choose a situation on the start screen under the scenarios — a prepared one, a random one by difficulty, or the weekly challenge. Create your own in the new Event Editor (main menu).
Weather. Frost, snow and icy rails. In frost points can freeze; point heating is a switch next to the clock (starts OFF). Icy rails mean longer starting and braking; in winter without heating, setting a route takes longer.
Neighbouring dispatcher may postpone accepting a train — an opposing train on a single line, a train running early with no free track, or a situation element. The train waits at the last signal and the delay is not counted against you. On by default; can be switched off under Advanced on the start screen.
Delay causes in the Assessment tab. Switch between Points and Delays: for every train, how much delay it brought, how much was added at your station and why (dispatcher, outside, operations, running). Information only — the score does not change.
Timetable graph editing in the scenario editor: drag a train path (the whole set circulation follows), change dwell times, copy a train with an interval, undo / redo.
Interval timetable assistant in the scenario editor: enter lines (train type, route points, interval by days and hours, counts for freight) and it generates the trains with turnarounds and tracks and checks crossings on single track.
Saved runs in slots A–Z. Save writes the next free letter; "Load run…" on the start screen and in the simulation lists the saved runs of the selected scenario. A saved run now keeps the whole state: score and delays, situation and signed orders, faults, weather, the neighbour's postponements and your actions on the desk.
Train infobox. Hold the cursor over a train for a short summary: number, speed, departure, destination, delay, stops, length. Without exact positions (Ctrl+T) it works over the whole occupied track. (player feedback)
Display scale for large monitors — interface size and train number size on the track, applied immediately (simulation settings → Display scale). (player feedback)
Rectangular platforms in the track editor: hold Shift while drawing a platform. They are now drawn on all modern panels too. (player feedback)
Steam Workshop — IN TESTING. Subscribed routes, scenarios and situations appear in the route selection with the author's name; your own route, scenario or situation can be published from the editors. Workshop content is read-only — use "Copy to my routes" to edit a copy.
Export diagnostics in the Help window: packs the log files into a ZIP you can attach to a bug report. Nothing is sent automatically.
Changes
Banking and light engines. A train that needs a banker is marked on the board in advance, in F2 and with a message when it enters. F9 couples the banker and the train stays a train (brake test about 3 minutes). F12 or Shift+F11 (or Ctrl+N) on a free locomotive opens the light engine dialog: the number is suggested by national rules (CZ Lv, SK Rv) and you choose the destination; a light engine runs up to 90 km/h. (player feedback)
Train routes run from a signal to the next signal and never end inside a throat or on points behind a track end.
Shunting: a click on a shunting signal in the basic view sets a shunting route (no Ctrl needed). A shunting route can no longer be set up to an entry signal from an automatic block line where the station has a shunting signal for that direction — a train may be approaching. On-order shunting no longer lights the signal it starts at. A shunting route no longer waits for the automatic block direction. (player feedback)
Point faults: a faulty switch is marked with a red ring on every panel and in the basic view; the Emergencies panel tells you what to do (throw the lever to + and −) and that a random fault repairs itself after 8 minutes. Every manual throw blinks the switch for about 3 seconds.
Dispatcher window only on F4 (F7 removed). Right-click a lever for the switch menu.
Training, step 6 (locomotive run-round) now guides you part by part and marks the signal for the first move; if you stay on a step for 3 minutes, "Skip step" is highlighted. (player feedback)
Random trains removed — the traffic range slider remains.
The executable is now PrimeRailControl.exe (was Steam.App.exe). (player feedback)
Import from OpenStreetMap tries three Overpass servers and shows the full cause if all fail; imported points snap to the grid. (player feedback)
All texts translated in all 12 languages; the start screen switches language immediately.
Own monochrome icon font — no coloured emoji and no empty squares in the interface.
The editors ask to save every unsaved change when you leave or close the app.
Smaller download.
Help window no longer lists F5 and Ctrl+F5, which do nothing in this version. (player feedback)
Fixes
Points could not be thrown in the dispatcher window. (player feedback)
A train departing on automatic block turned back to a route set for another train. (player feedback)
Trains not placed at start ("no suitable running track") and "path not found" for trains with a stop on the line or a reversal.
A train on the open line at start appeared 30 minutes later at the portal.
A train reversed en route stood facing the wrong way at start.
Two trains with the same number after a turnaround (Plzeň – Cheb, Bechovice – Kolín and six more scenarios).
A train route was released under a moving train.
A train waited in front of a green signal when its next route was in the queue.
A route went to the queue because of a train waiting at a portal on the other track.
The detached banker ran only 30 km/h. (player feedback)
F1 had to be pressed twice for another train; the F1 timetable now marks the current and next station. (player feedback)
The traffic range slider showed a wrong value at start. (player feedback)
Bells kept ringing after returning to the main menu. (player feedback)
Narrow right panel in the scenario editor with cut texts — now wider and resizable. (player feedback)
Helper windows (consents, dispatcher window) stayed open over the main menu.
A new run inherited desk states and penalties from the previous run.
Messages showed a node number instead of the switch name.
A turnaround train was missing in the delay table.
The signal preview stayed white at STOP on a shunting route.
English interface: a Slovak word on the desk button. (player feedback)
An unreadable folder outside the package emptied the whole route list.
Plzeň – Cheb: bankers now detach at Lázně Kynžvart / Ošelín instead of leaving the area with the train.